Technical Data; Accessories; Accessories For Europe/Asia; Accessories For America - Emerson AVENTICS Sentronic PLUS 614 Instrucciones De Montaje

13 Technical data

This section contains an excerpt of the most important technical data. Further
technical data can be found in the online catalog.
General
Specifications
Dimensions and weight See online catalog
Control Directly controlled valve
Housing material Aluminum / brass / stainless steel (depending on the version)
Material of internal parts Brass, stainless steel
Seals Nitrile (NBR), fluorocarbon rubber (FPM), EPDM
Ambient temperature dur- 0 ... 50 °C
ing operation (min. ...
max.)
Performance data
Specifications
3
Ø nominal width DN
[mm]
1)
Flow K value 0.18
V
3
[Nm /h]
At 6 bar 210
[std.l/min]
Insulation class
Degree of protection
Ignition protection type
1)
Test conditions in accordance with ISO 8778: Temperature: 20 °C, relative input pressure:
6 bar, relative output pressure: 5 bar
Assembly
Specifications
Mounting type Screw mounting
Mounting orientation Any, preferably vertical with solenoid upwards
Connections No hemp, no teflon strip
Electrics
Specifications
3
Ø nominal width DN
[mm]
Supply voltage (con-
trolled)
Max. residual ripple
Max. power consumption 12
[W]
Max. current consumption 500
[mA]
Electrical connection Depending on your configuration:
• 5-pin electrical connector M12 or
• 7-pin electrical connector M16
Input / outputs
Set point input 0 ... 10 V (input resistance 140 kΩ)
0 ... 20 mA / 4 ... 20 mA (input resistance 250 Ω)
Actual value output 0 ... 10 V (max. 10 mA), short-circuit-resistant
0 ... 20 mA / 4 ... 20 mA (max. 24 V DC)
Digital output PNP; open collector; max. 200 mA / 4.8 W, short-circuit-resis-
tant
HIGH (24 V DC) for actual = set point
LOW (open) for actual ≠ set point
AVENTICS™ Sentronic PLUS 614 | IM14229-R06 | English
6 12
0.60 1.20
700 1400
F
IP65
See g 5.3 Use in explosive areas
6 12
24 V DC
10 %
24 34
1000 1400
Pneumatics
Medium
Connections
Max. input pressure
Medium temperature
(min. ... max.)
Hysteresis
Linearity
Reproducibility
Min. set point
Min. output pressure
Standards and directives complied with
See declaration of conformity.
20
4.80

14 Accessories

5600
For information on accessories, refer to the online catalog.

14.1 Accessories for Europe/Asia

Description
M12 electrical connector, straight, 5-pin, with screw terminals
M12 electrical connector, angled, 5-pin, with screw terminals
M12 power supply cable 2 m, 5x0.25 mm², straight electrical connec-
tor
M12 power supply cable 2 m, 5x0.25 mm², angled electrical connector
M12 power supply cable 5 m, 6x0.56 mm², straight electrical connec-
tor
M12 power supply cable 5 m, 6x0.56 mm², angled electrical connector
M12 power supply cable 10 m, 6x0.56 mm², straight electrical connec-
tor
M12 power supply cable 10 m, 6x0.56 mm², angled electrical connec-
20
tor
Parameterization adapter USB, 1 m cable

14.2 Accessories for America

44
Description
M12 electrical connector, straight, 5-pin, straight, 12 mm
1800
Cable fitting PG9
M12 electrical connector, angled, 5-pin, 90°, 12 mm
Cable fitting PG9
Power supply cable, 6-wire, straight electrical connec-
tor, 5-pin M12, 24 AWG, shielded
Power supply cable, 6-wire, angled electrical connector,
5-pin M12, 24 AWG, shielded
Parameterization adapter USB, 1 m cable
Specifications
• Air or neutral gas
• ISO 8573-1:2010 [7:4:4]
• Non-condensing
1/8 – 1/4 – 1/2 – 1 – G/NPT
Depending on the product variant. See
the material number
0 °C ... 60 °C
< 1 % of the final value
< 0.5 % of the final value
< 0.5 % of the final value
50 mV (0.1 mA / 4.08 mA) with shut-off function
1 % of the final value
3 m
5 m
3 m
5 m
g 5.2.1 Configuration of
Item no.
88100256
88100725
88100726
88100727
88100728
88100729
88100730
88100731
N50930300100000
Item no.
TC05F20000000000
TC05F20000000000
TC0503MMS000671Y
TC0505MMS000671Y
TD0503MMS000671Y
TD0505MMS000671Y
N50930300100000
23