Reversing The Door Swing (Optional) - Furrion ARCTIC FCR08DCGTA Serie Manual De Usuario

Fig. 2
3. Install the air vent and tighten the screws. (Fig. 3)
Fig. 3

Reversing the Door Swing (Optional)

Your refrigerator is ordered as either a left or right open swing
from the factory, you may change the door swing direction as
required.
1. Disassemble the freezer door by removing the Hinge A
fixing screws. (Fig. 4) Remove the Hole Plastic Cover
Plugs from the left side of the refrigerator and set aside for
future use.
Hole Plastic Cover Plugs
Hinge A
Fig. 4
2. Disassemble the Refrigerator Door by removing the Hinge
B and Hinge C fixing screws. (Fig. 5)
Hinge B
Hole Plastic
Cover Plugs
Hinge C
Fig. 5
3. Reverse the parts of Freezer Door Lock Cover, Metal
Bracket, Plastic Bushing, Freezer Door Lock, Lock Fixing
Block to the opposite side respectively. (Fig. 6)
NOTE: The Metal Bracket is only applicable to models
FCR08DCGTA-BL/BR and FCR10DCGTA-BL/BR.
Lock Fixing Block
Freezer Door Lock
Fig. 6
4. Remove the Refrigerator Door Lock Cover (right) and
save it for future use. Change Refrigerator Door Lock and
Lock Fixing Blocks to the opposite side. Install the left side
Refrigerator Door Lock Cover, provided as an accessory
with the unit, where the door lock was. (Fig. 7)
- 6 -
Plastic Bushing
Freezer Door Lock Cover
Metal Bracket
CCD-0005506 Rev: 03-24-22