INTRODUCTION
UNPACKING
Check all parts from carton against the Carton Contents
List.
If any parts are damaged or missing, contact
1-800-4-RIDGID (US and Canada) or by email at
info@ridgidvacs.com.
CARTON CONTENTS LIST (Fig. 1)
Key Description
A*
Backpack Vac (Harness & 3 Filters) .................. 1
B*
Cloth Filter (VFB102) ........................................ 1
C
Replacement Dry Filter Bag (VFB600)............... 1
D
Hose .................................................................. 1
E
Crevice Tool ..................................................... 1
F
Dusting Brush . ................................................. 1
G
Extension Wand ................................................ 2
H
Master Floor Tool ............................................ 1
I
Carpet Brush Insert .......................................... 1
J
Floor Brush Insert ............................................. 1
K
Owner's Manual. ............................................... 1
* These parts come preassembled.
6
6
QT
QT
DRY / SEC / SECO
DRY
6.6
6.6
L
L
B*
C
E
F
SP7128-1 HDB6000 ESF 2022.indb 6
SP7128-1 HDB6000 ESF 2022.indb 6
Fig. 1
Harness
A*
G
D
QUICK START (Figs. 2A, 2B, 2C, & 2D)
1. Unlatch the three clamps on the top of the unit and
remove the Backpack Vac lid (Fig. 2A).
2. Remove the dry filter bag (VFB600) (C) and the
cloth filter (VFB102) (B) from the Backpack Vac (A)
(Fig. 2B).
3. Check to make sure the dome filter at the bottom of
the Backpack Vac (A), did not shift during shipping
Qty
(Fig. 2C).
4. Replace the cloth filter and the dry filter bag into the
Backpack Vac (Fig. 2B). For fine dust pickup (pet
dander, drywall dust, allergens) use the VFB610
filter bag (sold separately). For all other pickup, use
the VFB600 dry filter bag (C).
5. Replace the lid and relatch the three clamps
(Fig. 2A).
6. Push the hose (D) into the lid inlet Vac port
(Fig. 2D).
Backpack Vac
Lid
Clamp (3)
K
Dome
Filter
H
I
J
6
Fig. 2A
Fig. 2C
(D)
(A)
6
QT
DRY / SEC / SECO
6.6
L
8/11/22 11:27 AM
8/11/22 11:27 AM
Fig. 2B
(C)
(VFB600)
(B)
(VFB102)
(A)
Fig. 2D
Lid Inlet
Vac Port