Lenco CR-650BK Manual De Usuario página 12

DAB Manual Tune
As well as the full scan function, you can manually tune the
radio. This can help if you know your radio has missed
stations. You will need to know which multiples the missing
radio station is in.
1: Press and hold the
Scan", Press the
press the enter button to confirm.
2: Press the /
channels, which are number from 5A to13F.
3: After your desired channel number is selected, press the
enter button to enter the current multiplex, it will now
display the multiplex and below you will see the signal
strength.
4: You will not see any new radio stations or hearing anything while in manual tune. To find the
newly tuned in stations search through the station list.
Preset/Memory Setting
Store the current radio station as a preset
1: Hold the
2: Press the /
to store the station.
You can also do a quick save the current station to one of the 5 top preset buttons by
longpressing one of the preset buttons.
button and enter into "Station
/ button to select the Manual mode,
button to cycle through the DAB
to enter the station memory function
button to select the preset number of your choice and press the enter button
12