Teka RVI 30097 GBK Manual Del Usuario página 35


If you want to reveal actual temperature, please press and hold the "
button for 3 seconds, the LED will flash and display the actual temperature. After
stopping pressing the button for 5 seconds, LED figure will stop flash, then revert back to
display the set temperature.
 The controls of your Wine cooler (the Lower zone)
1) indicator light
Compressor in operation display.
2) LED display window
Display temperature for lower zone.
3) " " button (right)
To set the temperature of the lower chamber.
(Press once the button, the temperature will increase 1°C.)
4) " " button (right)
To set the temperature of the lower chamber.
(Press once the button, the temperature will decrease 1°C.)
 Setting the Temperature Control

To set the temperature:
Connect the power cord to a properly grounded outlet. In the event of a power
interruption.

When pressing
lower compartment automatically. The LED will flashing and display the setting
temperature.
Press once the button, the temperature will decrease or increase 1°C. After stopping
pressing the button for 5 seconds, LED figure will stop flash, then exit setting model.

The temperature setting can be adjusted from 10℃ to 18℃

This appliance memorizes and saves its set temperature. In case of a power outage, the
unit adjusts to its previous temperature setting when power resumes
Replaceable (LED only) light source by a professional
This product contains a light source of energy efficiency class G.
or button, the system will be entering the set up mode in the
33
" or " "