Initial Installation - DJI D12000iE Guía De Usuario

Initial Installation

Removing the Original Supporting Feet
To install the casters and the matching supporting feet, remove the four original supporting feet first.
1. Nut
2. Original Supporting Foot
3. Bolt
Installing the Supporting Feet
Align the mounting holes on the supporting feet with those on the generator frame. Insert the bolts through the
mounting holes and secure them with nuts.
1. Bolt
2. Supporting Foot
3. Nut
Installing the Casters
Place the washer on the inner side of the mounting holes on the generator frame, insert the wheel shaft
through the caster and the mounting holes, and secure with the clip.
1. Wheel Shaft
2. Washer
3. Clip
Installing the Handles
Align the handle with the mounting holes on the generator frame, insert the bolt throught the mounting holes,
and secure with a nut.
1. Bolt
2. Nut
3. Handle
4
1
2
3
1 2 3
1
1
2
3
2 3