Proper Use; Technical Data - EINHELL GC-HC 9024 T Manual De Instrucciones Original

3. Proper use

Important! This electric hedge trimmer is suitable
for cutting hedges, bushes and shrubs.
Important! Never use the hedge trimmer to cut
grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Rated voltage ......................... 230-240 V ~ 50 Hz
Power input .............................................. 900 W
Cutting length ......................................... 410 mm
Cutter rail length ..................................... 480 mm
Tooth spacing ........................................... 20 mm
Cuts/min ..................................................... 2100
Max. cutting thickness .............................. 15 mm
Weight .......................................... approx. 5.1 kg
Protection class:........................................... II /
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841-1.
L sound pressure level ................... 87.63 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 97.23 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Guaranteed sound power level L
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 62841-1.
Anl_GC_HC_9024_T_Heckenschere_SPK7.indb 17 Anl_GC_HC_9024_T_Heckenschere_SPK7.indb 17
GB
Handle under load
Vibration emission value
- Front handle a
- Rear handle a
Uncertainty K = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Cut injuries are possible if no safety clothing
is used.
2. Lung damage if no suitable protective dust
mask is used.
........... 105 dB
WA 3. Damage to hearing if no suitable ear protec-
tion is used.
4. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 17 -
= 1.796 m/s
2
h.
= 3.566 m/s
2
h.
2
31.10.2022 08:52:43 31.10.2022 08:52:43