8825XLDFU8_06_04.qxd
20
Get user manuals:
See SafeManuals.com
ENGLISH
C
9
1
10
2
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Cleaner, model RC1776, or
rubbing alcohol) and lubricated with Norelco
Razor Lubricant, model AL80, or one drop of
mineral oil (in the center of the head). This helps
prevent wear of the shaving heads.
After Each Use: Trimmer
1
2
C
3
C
4
5
7/9/04
5:01 PM
Press down and turn wheel clockwise until
it locks into place.
Replace the Razor Head Assembly back on
razor.
Turn razor OFF.
Push Trimmer Slide Switch up to pop up
Trimmer.
Clean Trimmer with the brush every time
you use it.
Lubricate the Trimmer teeth with Norelco
Razor Lubricant (model AL80) or with one
drop of mineral oil every 6 months.
Close Trimmer by Sliding Trimmer switch
down.
Page 20
(Black plate)