Introduction; Characteristics; Unpacking And Checking Equipment - Dynascan RL-300 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.- INTRODUCTION:

● Read carefully and completely way this Instruction Manual.
● It is important that you understand the instructions in this manual correctly.
● Turn off and do not use the transceiver, or charge or replace the battery in explosive
areas.
● Do not attempt to open, modify or adjust the transceiver.
● Do not use the transceiver if the antenna is damaged.
● Do not use the transceiver in areas where its use is prohibited.
● Do not put the transceiver within of the car airbag deployment.
● Do not expose the equipment to direct sunlight, dust, high temperatures and high
humidity areas.
● Keep a minimum distance of 5 cm between the transceiver and your mouth during
transmission.
● If smoke or other smell appears on the transceiver, shut off immediately and contact the
Technical Service for verification.
● Follow local regulations to the use of this equipment type.
● The use of this equipment is the sole responsibility of the user´s.

3.- CHARACTERISTICS:

● Hidden LED screen system.
● Up to 256 programmable channels.
● CTCSS/DCS codes.
● Scrambler function.
● Compander function.
● Frequency step function.
● Emergency alarm (S.O.S.).
● Voiced operated transmission (VOX).
● Voice prompt.
● Private calls, group calls, all calls.
● Programmable side keys.
● Scan function.

4.- UNPACKING AND CHECKING EQUIPMENT:

Thanks for choosing our handheld transceiver.
Before use:
1. Check that the packing box is not damaged.
2. Carefully unpack the transceiver and confirm the following articles are included in
the packaging. If any articles are missing or damaged, contact with your
salesperson immediately.
English - 4 -

Publicidad

Tabla de contenido
loading

Tabla de contenido