Klarstein FULL HOUSE 3.0 Manual De Instrucciones página 66

EN
66
If "U" or "_" flashes on the screen together with the heat setting, it means that:
• there is no cookware on the selected hob or,
• the cookware you are using is not suitable for induction or,
• the cookware is either too small for the hob or is not in its centre.
Note: The heating process will not start until suitable cookware has been placed on
the hob. If there is no suitable cookware placed on the hob, the device switches off
automatically.
Ending the cooking process
1
Touch the button of the
hob you would like to
switch off.
3
Switch off the entire hob
by pressing the On/Off
button.
Switch off the corresponding hob by moving your finger
to the left over the control until "0" is displayed on the
screen.
Take special care when the screen shows "H", as the
hob will still be hot. As soon as the hob has cooled
down and can be touched without risk of burns, the
indicator goes out. You can also use this to save energy,
as pots can be kept warm in this way.
2
4