LG PREMTA200.ENCXLUS Manual De Instalación Del Usuario página 13

NOTE
• Tap the icon to go to the error history screen.
⑦ Schedule Operation
Check the schedule information that is currently
operating.
Please refer to the Schedule's Detailed Description
page.
NOTE
• When you enter Settings – General Settings –
Lock menu, you can set/check the lock status.
• When locking a function by remote controller or
central controller, a lock icon is displayed.
Air Quality Level
You can check the fine dust status by selecting the
air purify icon on the home screen.
STANDARD OPERATION
NOTE
• The air purifying icon is only displayed when air
purify is on and operating.
• The total index shows the worst of the 3 dust state
values as representative values.
• You can go to the air purify display screen by
Swiping the screen on the home screen.
Monitoring Information
The monitoring information can be checked by
swiping left or right from the home screen.
NOTE
• At the top of the screen, humidity, CO
concentration and outdoor temperature are
displayed.
• The product operation status is displayed in the
center of the screen.
• Alarm icons related to CO
error are displayed at the bottom of the screen.
Icon Description
Notification of excessive CO
concentration.
Displayed when CO
is about 940 ppm or higher when
ventilation products are connected
GHP outdoor unit engine oil
replacement notification.
Displayed when 10000 hours of
accumulated operation time of GHP
outdoor unit have elapsed
13
2
, oil change and group
2
2
concentration
2