Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Function
This is a function to set whether to display the operation mode
Display Opposite
selection impossible status according to the operation of the outdoor
Mode
unit when the cooling/heating mode is selected for products that do
not support simultaneous cooling/heating operation.
Set the password to prevent unauthorized change to remote controller
settings.- If the password is set, when you enter "menu – setting",
Password
you need to input password toenter the setting list.- When you forgot
the password, you can initialize the password using the installer
setting's"password initialization".The initialized password is "0000".
Remote
This function executes the pairing function of the Wi-Fi module
Controller Wi-Fi
connected to ThinQ App.
Pairing
Auto return to
This is a function to set whether to automatically return to the main
main screen
screen when there is no touch input for a certain period of time.
Sound
Activate touch button sound effect
Air conditioner / Ventilator Settings
Product
Function
Aircon Vent.
Vane Angle
O
You can adjust the angle of the wind.
control
When cleaning the indoor unit filter,
Elevation Grill
O
move the elevation grill up and down.
After using the air conditioner for a
certain period of time, it is the cleaning
function of the kit attached to the
Robot
O
product.
Cleaning
Available after 30 seconds of operation
stop, select whether to operate
automatically as an option.
When the product is turned off after
cooling operation, mold or moisture
Auto Dry
O
can be removed by drying the inside of
the room.
You can check the information
Filter Sign
O
O
remaining afterusing the filter and reset
the usage time.
In Auto operation mode, the cooling
Change
and heating operation is automatically
O
O
Temperature
converted and operated according to
the set temperature.
This function sets the minimum
Dead Band
O
difference between heating and cooling
desired temperature in 2set Auto mode.
This function executes the pairing
Wi-Fi pairing
O
function of the Wi-Fi module connected
to the indoor unit.
The name of each Zone to be used
for zone control can be determined by
Zone Name
O
directly typing it according to the user's
style.
Comfort
Set the steps for comfort cooling
O
O
Cooling
operation of outdoor unit.
Description
Description
All vanes operate the same at the
Up / Stop / Down
Automatic : Automatically performs after 30 hours of accumulated indoor unit
operation.
Manual : Performs manually.
On / Off
Note that filter use information is a reference item, that the actual filter
status may vary depending on the installation environment and usage
conditions.
• If dust gets on the filter, the cooling/heating ability decreases and the
electricity bill is high, so make sure to clean the filter when it is time to
clean it.
2~14 ˚F (1~7 ˚C)
0~10 ˚F (0~5 ˚C)
Off / Step1 / Step 2 / Step 3
Note & Option
On / Off
On / Off
On / Off
Option
Each/
Customize
All
The angle for
each vane
set angle.
can be set
individually.
-
-
SETTINGS
21
-
Standard
Vanes are controlled as
standard movements for
each product.
Publicidad
Tabla de contenido
