Midea MDRS723MY Serie Manual De Usuario página 14

5 Temperature setting of refrigerating chamber
Click temperature adjusting button
Then click the button
scope is between 2°C and 8°C.Every time you click the button, the temperature will be changed 1°C.
After adjusting, New temperature setting will take effect after locking the control panel.
6 Temperature setting of freezing chamber
Click temperature adjusting button
Then click the button
Setting scope is between -16°C and -24°C. Every time you click the button, the temperature will be
changed1°C, New temperature setting will take effect after locking the control panel.
7 Storage upon power failure
In case of power failure, the instant working state will be locked and maintained till re-electrification.
Recommended setting: Refrigerated chamber 4 ℃, freezing chamber - 18 ℃.
8 Opening warning and alarm control
when open the refrigerator doors, the opening music will play.
9 Error code
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though
the refrigerator may still have cold storage function with the following faults, the user shall contact a
maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.
or again to set the temperature, and will hear one beep. Setting
or again to set the temperature, and you will hear one beep.
Error Code Fault Description
Temperature sensor failure
E1
of refrigerating chamber
Temperature sensor failure
E2
of freezing chamber
Freezing defrost
E5
circuit error
Communication error
E6
Ambient temperature sensor error
E7
Radar temperature senor failure
Radar temperature senor failure
, refrigerating compartment temperature will blink.
, freezer compartment temperature will blink .
sensor detection
EN-12