Perating Conditions; P Reventive Maintenance - SUHNER ABRASIVE LWA 70-KF Documentación Técnica

2.4 o

PerAting conditions

Temperature range during operation: 0 to +40°C
Relative air humidity: 95% at +10°C not condensed
3.
haNDLINg
3.1 t
ools
Use only clean tools!
3.1.1 c /f
hAnging itting the tool
Hold spindle by wrench flats with open end wrench and
release down screw with hexagon spanner.
Remove screw and washer.
Mount grinding tool and washer and fix again with screw.
3.1.2 A
/ o
PERaTIoN
Loosen hex socket.
Adjust the limit stop on the setscrew. Fasten with hex
socket.
4.1 P
erating hours.
djust the limit stoP
4. S / m
ERvICE
reVentiVe mAintenAnce
Even if the machine still operates perfectly,
the motor should be removed and cleaned
by a specialist after approx. 300 to 400 op-
aINTENaNCE
17