CAPITAL SPORTS Strike Bike Manual De Instrucciones página 46

EN
46
Step 7:
• Fix the saddle (10) to the saddle sliding set (7) as shown tightly by socket
spanner (108). Then you can loosen the knob (12) to slide the saddle (10)
to a desired position and tighten it by the knob (12).
• If the saddle post 's height is not right for you, then you can loosen the
spring knob (17) and pull out, then select a desired height to align the hole,
and then fi x it tightly by the spring knob (17).
Note: Do not exceed the mark "MAX".
CAUTION
Risk of injury! Now the equipment is completed assembled, if
you fi nd it is not leveled on the floor you can adjust it by the
adjusting pads (23). Make sure you have tightened all the
screws and nuts well before beginning your workout.