Operation - Klarstein VARICOOK XL Manual

OPERATION

• Press the „ON / OFF" button to turn on the device
• The device automatically detects whether you are using a suitable pot. If so, press
the „Menu" button to select a desired setting. Otherwise, the display will show the
„E0" warning display and you will hear a repeated beeping. After 40 seconds, the
unit switches to standby mode.
Setting the power level
Turn on the device and select the power level mode using button 3. Use the +/- buttons
to set the desired power level between 200 W and 1800 W (200 W and 1300 W).
Setting the temperature
Turn on the device and select the temperature setting mode using button 4. Use the +/-
buttons to adjust the desired temperature between 60 °C and 240 °C.
Setting the timer
Press button 5. Use the +/- keys to set the desired time between 0 and 180 minutes.
Note: Hold down the + button to reach the desired value faster.
Automatic shutdown
If you remove the pan from the hob, the device switches itself off automatically. If you
return the pot back to the hob within 40 seconds, the appliance continues to work with
the parameters previously set.
Suitable pots
• This device is suitable for use with cookware made from: steel, stainless steel, iron,
enamelled iron, cast iron with a flat bottom and a diameter 12 to 26 cm.
• This appliance is not suitable for the use with the following cookware: heat-resistant
glass, ceramic, copper, aluminium with rounded bottom and less than 12 cm in
diameter.
EN
21