Sportplus SPEED RACER Manual De Instrucciones página 34

TROUBLESHOOTING
No display on the computer
• Start quick-start mode by pressing any button.
• Make sure that the batteries are correctly inserted in the computer.
• Insert new batteries if necessary.
No Heart Rate signal displayed
• Ensure that your chest strap is worn correctly, and that there is moisture under the
electrodes of the chest strap.
• Relocate the bike away from any equipment that could potentially interrupt the radio
frequency signal, such as a DVD player or television, etc.
RPM or HR does not change
• Repeatedly press the MODE button to switch between the values for SPEED
(speed), DIST (distance), TIME (training time) and CLOCK (time of day).
• Repeatedly press and hold the SET button to delete previous values or to access
and exit a setting menu.
Heart Rate signal gets interrupted or drops out
• Make sure there is a distance of at least 1 m to other home training units.
• Verify that your chest strap is secure and that the electrodes are making contact with
your chest at all times.
Computer displays no values (speed, distance, time)
• Make sure the spiral cable (70) is connected correctly to the computer (71) and the
connection socket (69).
• Make sure the sensor is in its correct position.
The brake makes noise, squeaks or brakes unevenly
• Check the brake pad and the fl ywheel for dirt.
The home trainer wobbles/is not stable
• Screw the height-adjustable feet (8) in or out to counteract any unevenness in the
fl oor.
Please contact our service center if you are still experiencing problems.
SP-SRP-2100-i-IM-INT-V07.indb 34
34
5/4/2021 4:19:36 PM