Brewing Coffee Now; The Fresh Brew Timer Feature - Oster BVSTDC4401 Manual De Instrucciones

Ocultar thumbs Ver también para BVSTDC4401:

Manual de instrucciones (20 páginas)

Contenido

Tabla de contenido

Idiomas disponibles

1. After completing the steps in the "Adding Water and

Coffee" section and with the thermal carafe and the filter

basket securely in place, turn the coffee maker on by

pressing the select "Selec./Apag." button once (Figure 4).

The brew now "Colar Ahora" light will turn on and pulse to

signal that the coffee maker is on and brewing.

2. To enjoy a more full flavored cup of coffee, press the Brew

Strength "Intensidad" button once. The strong "Fuerte"

brew strength light will turn on. The coffee maker will

remain in the brew strength you have selected until you

change it back to regular "Regular" strength by pressing

the brew strength button or until you unplug the unit

(Figure 5).

3. After the used coffee grounds have cooled, carefully

remove the filter basket and discard them.

NOTE: Always allow the coffee maker to cool down before

cleaning.

4. Prior to making a second pot of coffee, turn the coffee

maker off. This will reset the fresh brew timer feature. To

turn the coffee maker off, press the select "Selec./Apag."

button until all lights turn off.

5. Make sure the glass decanter/ thermal carafe is empty before starting to

brew coffee.

6. Be sure to turn your coffee maker off when no longer using it.

NOTE: Scalding may occur if the lid is open during brewing cycles.

THE FRESH BREW TIMER FEATURE

The fresh brew timer feature lets you know how long your

coffee has been waiting for you. At the start of the brew

cycle, the fresh brew timer feature will automatically be

activated and the clock display will change to show the

time since brewing began.

Press the fresh brew time "Temporizador de Frescura"

button once (Figure 6) to go back to the clock function

(while on the clock mode, the fresh brew timer feature

will keep counting). The display will automatically change

back to the clock after 2 hours or when the unit is turned

off.

NOTE: The brew now "Colar Ahora" light must be on for the fresh brew timer

feature to operate. The time and delay brew time cannot be set when the fresh

brew time is displayed.