Ninebot KickScooter Manual Del Producto página 2

EN
Diagram
1
Handlebar
Right Direction
Indicator
Bell
Brake Lever
Headlight
Quick-release Lever
Folding Mechanism
Safety Lock
Reflector
Front Fork
Front Fender
Hub Motor
01
Dashboard & Power Button
Electronic Throttle
Dashboard & Power Button
Snap Hook
Direction
Indicator Button
Left Direction Indicator
Stem
Footboard
Disc Brake
Power Button:
Buckle
to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
Speedometer:
Rear Fender
Walk Mode:
F25I / F40I: The headlight and rear light keep flashing and can't be turned off.
Rear Light
* How to enable in the Segway-Ninebot app: Tap the sidebar menu > Settings > Walk Mode.
& Reflector
Speed Mode:
Insurance
Plate Area
Rear Direction
Indicator
Error Notification:
Reflector
Temperature Warning:
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use until the temperature has reverted to the
Battery Compartment
normal range.
Bluetooth:
Kickstand
Battery Level:
* The battery power is very low when the first battery bar is red. Please charge your KickScooter immediately.
Charge Port
Speedometer
Bluetooth
Headlight
Temperature Warning
Press the button to turn on; press and hold the button for 3 seconds to turn off. When the KickScooter is on, press the button
It displays the current speed of the scooter, as well as error codes.
Max. speed is 5 km/h (3.1 mph).
There are three modes available. The top speed is as follows:
Model
F25I
Mode
ECO (Energy-saving mode)
15 km/h
D (Standard mode)
20 km/h
S (Sport mode)
25 km/h
It indicates that the scooter has detected an error.
It indicates that the battery temperature has reached 55°C (131°F) or is below 0°C (32°F).
It indicates that the scooter has been successfully connected to the mobile device.
The total battery level equals 5 bars.
Speed Mode
Walk Mode
Error Notification
Battery Level
Power Button
F40I
15 km/h
20 km/h
25 km/h
02