Ego Power+ LM2110 Manual Del Operador página 46

REPLACING THE WHEELS
(Fig. 29a, 29b, 29c & 29d)
WARNING:
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with the
upper surface against a wall.
2. Use a flat blade screwdriver to pry
the dust cover away from the wheel.
3. Use an adjustable or 1/2 inch
(13 mm) wrench to turn the bolt
counterclockwise to loosen it.
4. Remove the bolt, the worn wheel,
and the wave washer from the
wheel axle.
NOTICE: When replacing the rear wheel
on the self-propelled mower (LM2120SP/
LM2120SP-FC/LM2110SP/LM2110SP-FC),
remove the drive gear from the worn
wheel and assemble to the new wheel
with the 3 screws.
46
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2110/LM2110-FC/LM2110SP/LM2110SP-FC/LM2120SP/LM2120SP-FC
Always remove
29a
Front wheel for LM2120SP/LM2120SP-FC/
LM2110/LM2110-FC/LM2110SP/LM2110SP-FC
29b
Rear Wheel
Drive Gear
Wave Washer
Rear wheel for LM2120SP/LM2120SP-FC/
LM2110SP/LM2110SP-FC
29c
Rear wheel for LM2110/LM2110-FC
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Screw
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Rear Wheel
Wave Washer
Wheel Axle