Using Self-Propel System With The Blades Rotating - Ego Power+ LM2110 Manual Del Operador

NOTICE:
For LM2120SP/LM2120SP-FC,
when the self-propel speed control
knob is rotated backward to the lowest
position, the self-propel function does
not function. WHEN THE MOWER IS
SHIPPED, THE KNOB IS DEFAULTED
AT THE LOWEST POSTION. BEFORE
STARTING THE SELF-PROPEL FUNCTION,
SLIGHTLY ROTATE THE SELF-PROPEL
SPEED-CONTROL KNOB FORWARD TO
AVOID FAILURE WHEN JUST PRESSING
THE SELF-PROPEL TRIGGER.
This system is independent of the blade On/Off switch; it is not dependent on blade
rotation. For example, when you have completed cutting your lawn, you can use the
self-propel to propel the mower back to your storage location without blade rotation.
Or you may choose to operate the mower as a non-self-propelled mower to maximize
battery running time.
To operate the self-propel system without blade rotation, press the self-propel
trigger(s). There are two self-propel triggers. Press either trigger towards the handle to
start the self-propel function.
To turn the self-propel off, release the self-propel trigger.

Using self-propel system with the blades rotating:

1. Depress the safety button.
2. With the safety button depressed, pull the bail switch upward to the handle and
release the safety button.
3. Hold the bail switch against the handle with either of your hands. Press either of
the self-propel triggers.
4. With one hand holding both the bail switch and the self-propel trigger against the
handle, use the other hand to adjust the self-propel speed-control knob to choose
the desired speed.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2110/LM2110-FC/LM2110SP/LM2110SP-FC/LM2120SP/LM2120SP-FC
17b
Self-Propel Speed-Control Knob
Self-Propel Trigger
LM2110SP/LM2110SP-FC
31