Assembling; Assembling Procedure - VWR isiScope 300 Serie Manual De Instrucciones

9.

Assembling

9.1

Assembling procedure

1. Insert the microscope into the head holder and
lock the clamping knob ①. (Fig. 1)
2. Remove the eyepieces dust caps and insert the
eyepieces in the empty eyepiece sleeve. (Fig. 2)
3. Lock the eyepieces using the locking knob ②.
(Fig. 3)
4. Connect the jack of the power supply to the so-
cket in the rear part of the microscope base. (Fig.
4)
5
①
Fig. 1
Fig. 2
Fig. 3
②
Fig. 4