ELIXO 3S
Remote control "A" = "source" remote control already memorised
Remote control "B" = "target" remote control to be memorised
For example, if the button on remote control A opens the gate fully, the but-
ton on the new remote control B will also open the gate fully.
3.4
Unlocking and locking the motor
Unlocking the motor
1] Insert the key.
2] Turn the key a quarter of a turn to the left.
3] Turn the handle to the right.
1
3
CAUTION
Do not forcibly push the gate. Hold the gate over its entire travel during
manual manoeuvres.
Copyright
©
2022 SOMFY ACTIVITES SA. All rights reserved.
2
Locking
1] Place the gate approximately 1 m from its closed position.
2] Turn the release handle to the left.
3] Move the gate manually until the drive mechanism locks.
4] Turn the key a quarter of a turn to the right.
5] Remove the key.
1
2
3
4 4
CAUTION
The drive must be locked before a new command.
4
MAINTENANCE
4.1
Checks
4.1.1 Safety devices
Check for correct operation every 6 months.
4.2
Replacing the remote control battery
EN
5
CR2430
or
CR 2032
11