When You Have Finished Cooking - universalblue UINDU6500-18 Manual De Instrucciones

3. Touching the heating zone selection control ,and a indicator next to the key will flash
4. Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1 minute, the Induction
hob will automatically switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking
zone.
No heating takes place unless there is a suitable pan on the coo-
king zone.

4.2. WHEN YOU HAVE FINISHED COOKING

1. Touching the heating zone selection control that you wish to switch off.
2. Turn the cooking zone off by scrolling down to"0" . Make sure the display shows"0"
3. Turn the whole cooktop off by touching the ON/OFF control.
alternately with the heat setting
29