ZACO A11s Pro Manual Del Usuario página 17

English
How to use
Operation
7. Do-not-disturb Mode (DND)
When in DND mode the robot will not function or clean. The default DND setting is on
from 23:00 to 9:00. User may customize the DND mode from the APP.
8. Default Cleaning
If no map is saved, select the default cleaning mode. The robot will clean up in square
zones of 6 m x 6 m. After a map is saved in the APP, activate default cleaning, and the
robot will automatically plan a route to clean room by room, and return to the charging
base when it finishes.
9. Edgewise Cleaning
If edgewise cleaning is activated from the APP and after the robot has automatically
identified the area to be cleaned, it will perform edgewise cleaning. After the cleaning
has finished, it will automatically return to the charging base.
10. Targeted Cleaning
Choose "Targeted Cleaning" mode from the APP. Define a target point you want to clean
in the map. The robot will automatically plan a route to the target point and clean an
area of 2 m x 2 m.
11. Area-based Cleaning
You can set up area-based cleaning from the APP. The robot will clean based on the
defined areas.
Note
During cleaning, the robot may move beyond the planned area. Please remove any
obstacle on the floor around the planned area since area planning cannot safely
restrict the robot's movements.
Find more information at www.zaco.eu
17