Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Maintenance
2in1 Water tank
1.
Tilt the robot as shown above to remove the parts from the 2in1 water tank.
2.
Empty the waste from the 2in1 water tank and clean it up with a cleaning brush.
Open the tank cover to pour out the residual water.
3.
Clean the filter and the mesh with a cleaning brush and water.
Dry thoroughly (for at least 24 hours) before reinstalling.
Find more information at www.zaco.eu
21
Publicidad
Tabla de contenido
Solución de problemas
