Maintenance
Dustbin
1.
Hold the release button on the
dustbin and remove it from the
bottom of the robot.
3.
Empty the waste from the dustbin and use the cleaning brush to clean up the
dustbin, filter, and mesh. Wash it with clean water. Put it back after it has dried.
Note
It is recommended to clean up the dustbin thoroughly at least once per week.
Please dry (for at least 24h) the dustbin, filter, and mesh before using them again.
20
2.
Tilt the robot in the direction shown
above to remove the parts from
the dustbin.
Find more information at www.zaco.eu
English