auna Oxford SE Manual De Instrucciones página 43

Programmed play mode
In programmed play mode, you can program the play order of the tracks on
your CD. You can program up to 20 tracks in total.
Note: To set up programmed play mode, the CD must be stopped in the CD
compartment and must not be paused or playing.
In CD mode, with the CD you wish to programme in the CD compartment
and stopped:
1. Short press the REPEAT button to enter CD programmed play mode.
'P01' will be displayed.
2. Short press the TUNE/SKIP + or - buttons to go to the track number that
you would like to programto play first. Short press the REPEAT button to
confirm.
3. 'P02' will now be displayed and you can select the second track that
you would like to programme. Continue to select each track as in Step 2
above, up to a total of 20 tracks.
Note: After you have selected track 20 in the programmed play list 'FULL'
will be displayed.
4. Short press the REPEAT button again to confirm the last track in the
programmed play mode list.
5. Short press the button to play the programmed tracks.


6. To exit programmed play mode, short press the
Remove the CD
Short press the button. The CD drawer will open and 'OPEN' will be
displayed. Remove the CD from the compartment.
Short press the . button to close the CD drawer. '- - -'., followed by 'NO'
will be displayed.
Note: If you stop or pause playing a CD for approximately 20 minutes, your
product will go to Standby mode automatically.
button twice.

EN
43