Modes Of Use; Important - Miniland singing buddy Manual Del Usuario

ENGLISH
have selected in a loop. Clicking on the
deactivate this option.
- Timer: Activating this function will regulate the play time of the
list selected. Click on the
Once the timer has been activated, you may consult the remaining
play time from the list, stop the timer for a moment or cancel it. With
this in mind, press the icon again and press "Pause" or "Cancel"
depending on which action you wish to carry out.
Note 1: The volume for music and sounds is controlled via your
mobile device. If you wish to raise or lower the volume use the
buttons on your mobile or tablet for the purpose.
Note 2: If you leave the eMyBaby application (without turning
it off completely), the music and sounds will continue to play in
the background.
Note 3: The extractable module is connected to the audio of your
device. To avoid listening to the sounds of any notification whilst
playing, you are recommended to put your Tablet or mobile in
Airplane Mode.

4.4. MODES OF USE

This product may be used in two ways as you wish:
1. Placing the extractable module in the smooth plush toy
Once the extractable module has been placed in the small pocket
in the plush toy's back and the velcro has been closed, it may be
given to the baby, who will feel the warmth of its parents close
by in total safety.
2. Using the extractable module by itself
The small extractable module does not need to be placed in the
plush toy. Furthermore, it can be hung anywhere using the fastening
strap included (5). Follow the instructions set forth in Figure 3
to do so.
Note 1: Only hand over the plush toy to your baby when you have
checked the velcro on the plush toy's is closed.
Note 2: Remove the fastening strap (5) before introducing the
extractable module into the plush toy.
5. INSTRUCTIONS FOR USE
5.1. TURNING THE EXTRACTABLE MODULE ON AND OFF
The device is turned on and off by pressing the on/off button on
the face of the same for around 3 seconds.
Your extractable module will beep 3 times when turning it on or off
to let you know it is operating or has been disconnected.
Note1: Do not forget to turn off your extractable module once you
have finished using it in order to conserve the battery.
Note 2: If the Bluetooth of your mobile or Tablet is disabled or
doesn't pair the extractable module with any device, the latter will
turn off automatically after 5 minutes.
5.2. CHARGING THE EXTRACTABLE MODULE
When your extractable module battery is low the front LED light
(2) will start to flash quitar in red and will beep at intervals for a
few minutes before going out.
In order to charge the battery connect the micro USB charging cable
supplied to the micro-USB port (3) on your extractable module and
the USB plug to your computer.
The LED light (2) will remain red while the battery is being charged.
The LED light (2) will go out once the battery has been fully charged.
Note: The battery takes around 2 hours to charge and has a life of
around 8 hours at medium volume.
Warning: Batteries may only be charged by adults or by children
at least 8 years old.
5.3. SETTINGS OF THE EXTRACTABLE MODULE
Follow the instructions below to connect your extractable module
to your mobile or tablet and to take advantage of all the content
singing buddy features:
5.3.1 ACCESS TO THE RELAXATION APPLICATION AND
DOWNLOADING SONGS AND SOUNDS
1. Download and install eMyBaby.
2. Click the Relaxation icon in the application. A window will appear
to download the sounds that are included by default in our app.
3. To record your own songs and sounds, go to the "Parents sounds"
section.
A window will then appear requesting a password. This password
icon will activate/
icon and specify the desired play time.
should only be used the first time you access this section. This
number is to be found on a sticker on the back cover of this manual.
This password will identity you as a user of singing buddy; keep it
for possible use in the future.
This password will be registered under your eMyBaby username,
and, as such, if you wish to access the application from another
mobile device you will not need to provide the password again.
4. If this is the first time you have accessed the relaxation
application, an alert will appear on your mobile device telling you
how to proceed to download songs and sounds from the same.
We recommend you perform the download when your device is
connected to a Wi-Fi network to avoid consuming your data rate.
In the event you do not wish to download anything at this time,
click on "Download later". The next time you access the relaxation
application you will be reminded of the pending download.
5.3.2. LINK BETWEEEN THE EXTRACTABLE MODULE AND
YOUR MOBILE DEVICE
In order to be able to listen to singing buddy songs and sounds on
your extractable module, you must link it to your mobile device.
This link must be carried out in the following cases:
1. If it is the first time you use the extractable module on your
mobile device.
2. If, when it was last used, the extractable module was linked to
another mobile device and you wish to link it to yours again.
In these cases, you must link the extractable module to your mobile
or Tablet in the way set out below.
1. Turn on your extractable module, pressing the on button (1) for 3
seconds until you hear a BEEP. The LED (2) light will start flashing
blue quickly, meaning that it is trying to pair with your device.
2. Enter the relaxation Settings' menu and press "Connect
extractable module". A series of images will appear which will help
you make the connection in the manner shown below.
3. Depending on whether your device is Android or iOS, follow the
detailed instructions set out below.
iOS Devices
4. If your mobile device has already enabled Bluetooth, enter your
device's Settings' menu.
If your mobile device does not have Bluetooth enabled, when
you press the button to close the last of the explanatory images,
a window will appear which will allow you to go to the Settings'
menu directly from your device.
Once you are here, enable the Bluetooth on your mobile or Tablet.
5. Select "singing buddy" from the list of Bluetooth devices found.
IMPORTANT: You should take into consideration that the
extractable module may only be connected to one mobile device at
a time, and, as such, if your extractable module is already connected
to another device it will not appear on your search. In order to be
able to connect successfully to the new device, first turn off and
turn on again your extractable module and carry out one of these
three actions.
a) Manually unpair the extractable module of the previous device
to which it was connected from the Bluetooth Settings' menu of
your mobile or Tablet.
b) Disable Bluetooth from the device to which the extractable
module was connected before.
c) Make sure that the device that was connected to the extractable
module previously is outside the coverage range of the extractable
module.
Android Devices
4. When you press the close button in the last window of
explanatory images, you will automatically enter the Settings'
menu of your device. Then check that your Bluetooth is enabled.
If it isn't, enable it.
5. Search for Bluetooth devices nearby and select "relaxation" from
the list of devices available.
IMPORTANT: You should take into consideration that the
extractable module may only be connected to one mobile device at
10