Fused Plug; User Servicing Instructions; Fuse Replacement - Hunter 90626-WH Manual Del Propietário

User Servicing Instructions:

This plug is a safety feature. It contains a safety device (fuse)
that should not be removed. Discard the product if the
electric shock and personal injury, DO NOT remove,
replace, repair or tamper with the originally supplied plug.
If the fan does not function properly, it may be due to the
safety device incorporated in this plug.
If the fuse fails, it is generally due to a short circuit or circuit
overload. Replace the fuse as per the instructions below. If
the replacement fuse fails, immediately unplug the unit and
contact our technical support department for assistance.

Fuse Replacement:

1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord. Locate
the door on top of the plug. Figure 1
2. Open fuse cover. Slide open fuse access cover on
top of attachment plug towards blades. Figure 2.
3. Turn fuse holder over to remove fuse. Remove
fuse carefully. Figure 3.
Warning! Electrical Hazard!
only with 5 Amp, 125 Volt fuse. If the product fails a
second time, immediately unplug it and contact our
technical support at 1-888-880-3267.
4. Gently push the fuse back into the pins that will hold it
in place.
Note: If the fuse is not seated properly, the unit will not
function.
5. Close fuse cover. Slide the fuse cover closed on the
plug.
6.
not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if
the attachment plug is damaged.

FUSED PLUG

5
Fi Figure 1
Fi Figure 2
Fi Figure 3
61810-01 R20210301
1
2
2