Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TYPE OF MAINTENANCE
Controlling and cleaning the collection bag
Controlling and cleaning the collection tank
Controlling and cleaning the vacuum accessories unit
Controlling and cleaning the fabric filter
Controlling and cleaning the noise reduction filter
To empty the collection bag, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see
MACHINE
SAFETY'").
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
2. Free the cover from the collection tank by releasing its hooks (1)
on the side of the collection tank ( Fig. 1).
3. Remove the cover (2) from the collection tank (Fig.2).
4. Put the cover delicately on the floor.
5. Fix the fabric filter to the collection tank by using its hooks (1) on
1
1
Properly cleaning the collection tank improves the appliance's
efficiency. To clean the collection tank, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see
MACHINE
SAFETY'").
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
2. Free the cover from the collection tank by releasing its hooks (1)
on the side of the collection tank ( Fig. 1).
3. Remove the cover (2) from the collection tank (Fig.2).
4. Put the cover delicately on the floor.
1
1
MAINTENANCE
RECOMMENDED MAINTENANCE OPERATIONS
CONTROLLING AND CLEANING THE COLLECTION BAG
2
2
CONTROLLING AND CLEANING THE COLLECTION TANK
2
2
24
X
X
X
X
X
X
X
X
X
X
X
X
the side of the collection tank ( Fig. 3).
6. Remove the collection bag (3) from inside the appliance (Fig.4).
7. Take it to a suitable place and empty it.
ATTENTION: the place designated for this operation must
comply
with
regulations.
8. Vacuum the bag with a vacuum cleaner.
9. Clean the collection bag with an air jet from a distance of more
than 20cm.
10. To refit the collection bag carry out the operations in the reverse
order.
1
3
5. Remove the collection bag (3) from inside the appliance (Fig.3).
6. Remove the fabric filter (4) from inside the appliance (Fig.4).
7. Take it to a suitable place for cleaning.
ATTENTION: the place designated for this operation must
comply
with
regulations.
8. Clean the inside of the collection tank with a cloth.
9. Clean the inside of the collection tank with a damp cloth.
10. To refit the fabric filter carry out the operations in the reverse
order.
3
3
X
X
current
environmental
protection
4
4
current
environmental
protection
4
4
Publicidad
Tabla de contenido
