Grandstream GXV3450 Guía De Instalación Rápida página 4

PHONE SETUP:
Phone Stand
Wall Mount
Installing the Phone (Wall Mount *Sold seperately):
1. Attach the wall mount spacers to the slot for wall mount spacers on the
back of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (see figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold
the handset while the phone is mounted on the wall.
Wall mount
Using the Phone Stand:
For installing the phone on the table with the phone stand, attach the phone
stand to the bottom of the phone where there is a slot for the phone stand,
(upper half, bottom part).
~ 3 ~
CONNECTING THE PHONE:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or
a router (LAN side of the router) using the Ethernet cable.
Slots for
wall mount
3. Connect the 12V DC output plug to the power jack on the phone; plug the
spacers and
power adapter into an electrical outlet. If PoE switch is used in step 2, this
phone stand.
step could be skipped.
4. The LCD will display booting up or firmware upgrading information. Before
continuing, please wait for the main screen display to show up.
5. Using the web configuration interface or from the menu of the touch screen,
you can further configure network connection using static IP, DHCP... etc.
Slot for expansion
Handset Rest
Tab with
*USB enabled only when power supply or PoE+ is used
extension up
Tips for using the GXV3450 Keys:
Tab with
extension
down
1. Tap on VOLUME DOWN / UP keys to adjust volume on the phone.
2. Tap on HOME key to return to the default idle screen. Or press and hold on
the HOME key for 2 seconds to take a screenshot.
3. Press MENU key to access phone's display settings, edit widgets and
thread manager. Or press and hold on the MENU key for 2 seconds to
enter managing application interface directly.
4. Press BACK key to go back to the previous menu.
*USB 3.0 Port
Kensington lock
Module
*USB 2.0 Port
PC Port
HOME
VOLUME UP
VOLUME DOWN
Conference
Transfer
Send
Standard Keypad
~ 4 ~
LAN Port Power Handset RJ9 Headset
Port Port
Message Waiting Indicator
MENU
BACK
Mute
Headset
Speaker