Product Set Up; Product Use; Rain Cover - Nuna triv Manual Del Usuario

Product Set Up

1
- Take the carry cot out. (1)
2
- A "click" sound means the support mount is attached
completely. (2)
3
- Pull up the canopy as illustrated while pressing the
buttons on both sides. (3)
4
- Check to make sure the handle is secure before placing
the child in the carry cot. (4)-1
Make sure that the handle is in the correct position of
use before carrying or lifting.
Mattress cover can easily be removed to wash.
5
- Attach the cover to the carry cot with zippers on either
side. (5)
6
- To fold the carry cot, release the support mounts (6)
(7) and fold the canopy while pressing the handle
adjustment button. (8)

Product Use

Canopy
1
- Pull the dream drape™ out from under the carry cot
canopy, then secure it to the two sides of carry cot with
magnets. (9)(10)
2
- For more ventilation, fold the rear panel of the canopy up
to reveal the canopy window. (11)
9 TRIV carry cot instructions
Carry Cot Attachment on Stroller Frame
1
- Secure the post adapters on the stroller seat mounts. A
"click" sound means the post adapters are attached. (12)
2
- Place the carry cot down until it latches into place. The
carry cot is securely attached with a positive "click". (13)
ALWAYS remove the stroller seat before using the carry
cot.
DO NOT fold the stroller when the carry cot is still
attached.
3
- The carry cot can be installed rear or forward facing on
the TRIV stroller. (14)

Rain Cover

To use the rain cover, place it over the carry cot. (15)
ALWAYS check ventilation when the rain cover is on the
product.
ALWAYS check that the rain cover has been cleaned and
dried before folding.
TRIV carry cot instructions 10