Sd Management; Timed Snap; Language - Optika Italy B-150V Serie Manual De Instrucciones

b) SD Management
1. After inserting the SD card, the remaining space and total
space of the SD card can be seen in "Available Space". (Fig.
36)
2. If "0.00 Gb /0.00 Gb" is displayed (Fig. 37), the SD card was
not successfully inserted; please try to reinsert it.
c) Timed Snap
"Hours, Minutes and Seconds" refers to the time interval of timed
snap, and "Counts" refers to the number of snaps to be done.
1. After setting the parameters, move the cursor to "Timed Snap
Start" and press → to start the acquisition.
2. At this point, the number jumps below. This is the number
of photos that have been successfully taken so far. (Fig. 38)
• If the available space of SD card is insufficient during the
process of timed snap, the process will be aborted.
d) Language
The current version can switch between Chinese and English.
(Fig. 39)
Page 21
F ig. 36 F ig. 36
F ig. 37 F ig. 37
F ig. 38 F ig. 38
F ig. 39 F ig. 39