Tabla de contenido
Publicidad
9 Setting up and connecting the unit
Operating
Brief description
mode
The unit is switched on. The display is
dimmed after a longer period of inactivity.
Standby
The automatic safety shut-off is activated
after 8 hours of inactivity.
The unit is switched off. The Setup menu is
Setup
activated to change the unit functions.
The unit is ready to use. Ultrasonic clean-
Normal
ing can be conducted using adjustable op-
mode
erating parameters.
The unit is ready to use. Four stored pro-
Programme
grammes can be selected for ultrasonic
mode
cleaning. The programmes can be spe-
cified and saved.
9
Setting up and connecting the unit
9.1
Notes on installation site
The unit is designed to be set up in commercially used premises such as laboratories, medical practices,
etc.
• The installation site must be well ventilated.
• The permissible ambient conditions must be met.
• The unit must be installed on a sturdy, horizontal, non-slip, moisture-resistant work surface with the
following characteristics:
– The surface must be non-flammable.
– There must be sufficient clearance above the unit to allow the cover and the objects being
cleaned to be removed.
– There must be an area available next to the unit for setting down the basket and inserts.
• Electrical connection conditions:
– Splash-proof earthed socket near the unit
(cable length approx. 1.5 m).
– The power connection must be protected by a fault-current circuit breaker (RCD).
– Ensure that the power supply required to operate the unit is available.
• Wastewater connection requirements:
16 / 28
Display
On
• Setup symbol
• Number of the selected unit function
(parameter)
• Current setting (parameter value)
• Set operating parameters
During Normal mode:
• Current operating status
• Available programmes
• Operating parameters of the selected
programme
No programmes have been saved:
• Programme number 1 and "--" for
duration and temperature
During programme operation:
• Current operating status
Renfert
Easyclean MD
Publicidad
Tabla de contenido
