Safety Instructions - Senix BLB4QL-M Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INSTRUCTIONS

Safety is a combination of common
sense, staying alert and knowing
how your item works. SAVE THESE
SAFETY INSTRUCTIONS.
WARNING!
To reduce the risk of injury,
user must read and understand
operator's manual.
WARNING!
To avoid mistakes and serious
injury, do not use this tool until the
following steps have been read and
understood.
1. Read the instructions carefully.
Be familiar with the controls and
proper use of the unit.
2. Do not operate this unit when
tired, ill or under the influence of
alcohol, drugs or medication.
3. Never allow children to operate
the unit. Teens must be trained,
accompanied and supervised by
an adult. Never allow adults to
operate the unit without proper
instruction.
4. All guards and safety
attachments must be installed
properly before operating the
unit.
5. Inspect the unit before use.
EN - 6
Replace damaged parts. Check
for fuel leaks. Make sure all
fasteners are in place and
secure. Replace parts that are
cracked, chipped, or damaged in
any way. Do not operate the unit
with loose or damaged parts.
6. Be aware of risk of injury to the
head, hands and feet.
7. Carefully inspect the area before
starting the unit. Remove rocks,
broken glass, nails, wire, string
and other objects that may be
thrown or become entangled
with the unit.
8. Clear the area of children,
bystanders and pets; keep them
outside a 50-foot (15 m) radius,
at a minimum. Even then, they
are still at risk from thrown
objects. Encourage bystanders
to wear eye protection. If you
are approached, stop the unit
immediately.
9. Squeeze the throttle control
and check that it returns
automatically to the idle position.
Make all adjustments or repairs
before using the unit.
10. Do not change the engine
governor settings or over speed
the engine.
11. This unit is intended for
occasional, household use only.
WWW.SENIXTOOLS.COM

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido