Speaker Output - Ashdown Engineering 22-HEAD Guia Del Usuario

22-HEAD
4-WAY FOOTSWITCH SOCKET - For the 4 way footswitch to operate it is
essential that the corresponding front panel push buttons be in the OUT
position.
This is a mono jack socket for connection of the Ashdown 4 way
footswitch (sold separately) only. Always connect this prior to turning
on the power to the amplifier as the footswitch derives its power from
the amplifier and sends a serial data stream to the amplifier in order to
operate the various functions.
Each of the 4 facilities available for selection is indicated by an LED that
will light when that facility is selected from the footswitch.
SPEAKER OUTPUT - The Speaker Output sockets are also situated on the
rear panel of the unit. The 22-HEAD has one power section rated at 600
Watts RMS with two Neutrik combi speakon out-puts. You can either use
Speakons or Jack Speaker cables to connect to your cabinet. Each Power
section has a minimum load of 4 ohms.
22-HEAD
USER GUIDE
SPECIFICATIONS
INPUTS
High Input
Low Input
Line Input
Effects Return
OUTPUTS
Tuner Output
Line Output
Effects Send
D.I. Output
EQUALISATION
Shape (Push Flat)
Bass
Middle
Treble
Slider1
Slider 2
Slider 3
Slider 4
Slider 5
Slider 6
Frequency Response
Speaker Outputs
Output Power
Impedance 3.9M Ohms Input range 150mV to 20V p-p
Impedance 10K Ohms Input range 300mV to 40V p-p
Impedance 22K Ohms Input level 0dBu nominal
Impedance 22K Ohms Input level 0dBu nominal
Impedance 1K Ohms Level 0dBu nominal
Impedance 10K Ohms Level 0dBu nominal
Impedance 22K Ohms Level 0dBu nominal
600 Ohms balanced Level -20dBu nominal
+8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave
+/-15dB @ 45Hz
+/-15dB @ 660Hz
+/-15dB @ 7kHz shelving
+/-15dB @ 100Hz
+/-15dB @ 180Hz
+/-15dB @ 340Hz
+/-15dB @ 1.3kHz
+/-15dB @ 2.6kHz
+/-15dB @ 5kHz
-3dB at 17Hz and 22KHz
Minimum impedance 4 Ohms
600watts RMS into 4 ohms. Per Power Section
USER GUIDE