Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.2 PAGING CALL
5.2.1 How to initiate a paging call
f Press
to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all door entry monitors on the system (maximum
4 door entry monitors).
1
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
5.3 ACTIVATION HANDS-FREE MODE
On receipt of a call the audio will be activated automatically.
f Press
for 10 sec to activate/deactivate Hands-Free mode.
» A confirmation tone will sound.
» The
LED on indicates that the Hands-Free mode is active.
10 Sec
5.5 SELF ACTIVATION FUNCTION
√ Self activation is possible only when the system is in
standby
f Press the self activation button (
on the door entry monitor the video from the external unit.
EXTERNAL UNIT
EXTERNAL UNIT
by default) to display
MAIN
MAIN
5.2.2 How to answer a paging call
f Press
to answer the paging call
» a (300 seconds) point to point conversation between the two door
entry monitor is estabilished.
» the paging call will be terminated for the other devices.
5.4 LOCK RELEASE FUNCTION
√ During "call in progress" or during Self activation.
f Press
to release the lock.
» the
LED will illuminate on the external unit.
f Press again to cycle through several cameras.
If a call is underway with an external unit it is NOT possible to
cycle between the external units
f Long press on key to enable / disable the function.
cycle
cycle
MAIN
UNIT 1
UNIT
MAIN
UNIT
1
UNIT
2
UNIT 2
UNIT 3
UNIT
UNIT
2
3
31
Publicidad
Tabla de contenido
