Daily Checks; Technical Data - OHAUS Defender 3000 Serie Manual De Instrucciones

EN-4
MAINTENANCE

Daily Checks


Check that the rocker feet are properly seated in the holes of each load cell.

Check that the 4 load cell feet are in contact with the floor.

Check that the scale is free from debris, especially under the edges of the scale.

Check that there is no damage to the connecting cable.
Cleaning
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning
agents.
The housing may be cleaned with a cloth dampened with a mild detergent if
necessary.
Maintenance of the U-Pallet scale should include regular cleaning.

TECHNICAL DATA

Specifications
Models
Dimensions (Overall / Inside)
Platform Capacity
Emin
Operating Temperature / Humidity
Material, Model i-DFP1500B1
Material, Model i-DFP1500C1
Feet
Load Cell
Load Cell Capacity Emax
Load Cell Safe Overload Limit
Load Cell Output Impedance
Load Cell Excitation Voltage
Junction Box
Net Weight
Cleaning the i-DFP1500B1 (painted steel version) in a dry environment:
- Wipe surfaces with a damp cloth.
- Use only common household cleaning agents.
- Never use water spray or high pressure cleaners.
Cleaning the i-DFP1500C1 (stainless steel version) in a wet environment:
- Water jets up to 60° C.
- Use only common household cleaning agents.
- Ensure that corrosive substances are removed at regular intervals.
TABLE 3. U-PALLET SCALE SPECIFICATIONS
i-DFP1500B1
-10 ° C to 40 ° C / 0% to 95% Relative Humidity, Non-Condensing
4 x swivel design, rubber bottom, adjustable height, front edge rollers
Rear panel access, IP65, Stainless Steel, 5 m Cable
51 kg
1260 x 840 x 90 mm / 1060 X 600 mm
1500 kg
0.5 kg
Painted Carbon Steel, Flat Surface
Stainless Steel (AISI 304), Sand Blasted Surface
4 x Shear Beam, Stainless Steel, OIML C3
1000 kg
120% of Emax
350 Ω ± 3.5 Ω
5V ~15V, DC/AC
Defender 3000 Series U-Pallet Scale
i-DFP1500C1
47 kg