To Assemble The Grass Catcher - Husqvarna TC 238TX Manual De Usuario

Full lever/extension
Support brackets
Offset strut
Latch extension spring
Grass catcher presence lever
5/16 x 18 x 1.5" Carriage bolts
5/16 x 18 Lock nuts
Full lever shroud
10-24 x 1/2 Buttonhead screw
Cross brace
Grass catcher handle
Clevis pin
1962 - 001 - 23.09.2022
Clip
3/8 x 16 x 3/4 Screw
10-24 Nut
Front frame
Pivot
3/8 x 16 x 1" Nut
3/8 x 16 x 1" Carriage bolts

To assemble the grass catcher

1. Unfold the bag and put it right side up.
2. Remove the 2 screws and the 2 nuts (A) from the
front of the top frame.
A
3. Put the grass catcher on the side.
11