To Assemble The Grass Catcher - Husqvarna TC 242TX Manual Del Usuario

Offset strut
Latch extension spring
Grass catcher presence lever
5/16 x 18 x 1.5" Carriage bolts
5/16 x 18 Lock nuts
Full lever shroud
10-24 x 1/2 Buttonhead screw
Cross brace
Grass catcher handle
Clevis pin
Clip
3/8 x 16 x 3/4 Screw
1923 - 005 - 13.10.2022
10-24 Nut
Front frame
Pivot
3/8 x 16 x 1" Nut
3/8 x 16 x 1" Carriage bolts

To assemble the grass catcher

1. Unfold the bag and put it right side up.
2. Remove the 2 screws and the 2 nuts (A) from the
front of the top frame.
A
3. Put the grass catcher on the side.
4. Push the ends (B) of the front frame (C) through the
loops in the fabric.
A
D
C
B
C
E
11