How To Use Basic Functions - Carrier RG10L3/BGEFU1 Manual De Instalación

How to Use Basic Functions

Basic operation
ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
1
3
Boost
COOL Mode
1. Press the MODE button to select COOL
mode.
2.
Set your desired temperature using the
TEMP or TEMP
3. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
4.
2
Humidity
button.
SETTING TEMPERATURE
The operating temperature range for units is
16-30°C (60-86°F)/20-28 C(68-82 F)(Model
dependent). You can increase or decrease
the set temperature in 0.5°C (1°F) increments.
AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operation based on
the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in AUTO mode.
1
4
3
06
button.
Boost
Humidity
2