Care And Maintenance - BABYZEN YOYO connect Guia Del Usuario

en

CARE AND MAINTENANCE

When cleaning the frame, use a non-toxic, non-abrasive cleaner. Mix a solution of
water with a small amount of a mild, non-toxic detergent. Apply to frame a damp
cloth. Never use strong detergents or solvents.
The fabric parts may be machine washed (maximum temperature 30°C). Never
use strong detergents or bleach.
If you need to put your frame in storage for any period of time, do not store in
a damp or hot environment. Allow air flow around product and do not stack
anything on it.
In case of rain, use the rain cover (sold separately). Let the frame dry before
folding it and storing it.
assembly and usage instructions
Installation of backrest
1. Use a coin to retract the white pin on
the backrest.
2. Insert backrest from the back of
YOYO connect frame and make sure
the white pin is on the same side as
the red pedal.
3. On the side of backrest without white
pin, mount hinge into YOYO connect
frame.
4. On the side of backrest with white
pin, align hinge.
5. Push white pin in to lock the backrest
into position.
12
Installation of 6+ fabric seat base
1. Mount fabric seat base over
backrest.
2. Slot plastic clips onto both sides of
YOYO connect frame.
3. Secure the straps around the lateral
tubes.
4. Under the fabric seat base, secure
the two straps by inserting into the
corresponding slots in seat base.
5. On the front centre of fabric seat
base, secure strap by looping
through slot in seat base.
6. On the sides of seat base fabric,
secure the straps around horizontal
bar by looping through buckle on
the back.