Technical Data - MADER MMA-105 Manual De Instrucciones

TECHNICAL DATA

PARAMETER
Voltage
Rated frequency
Voltage without load
Welding current
Electrodes
Output voltage at 78A
Operating time at 61A
Operating time at 78A
Operating time at 105A
Efficiency coefficient
Efficiency
Insulation class
Degree of protection
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL
NOTICE! Read all safety warnings and instructions. Otherwise, you run the risk of electric
shock, fire and/or serious injury.
Preserve all warnings and instructions for future reference.
The term "power tool" in the safety warnings refers to your wired power tool or battery power
tool.
1) W
ORKPLACE SAFETY
a) Keep the work area clean and well lit. Messy and dark areas can lead to accidents.
b) Do not use the power tool in explosive environments in the presence of flammable
liquids, gases or dust. Power tools create sparks that can ignite dust, flammable liquids or
gauze.
c) Keep children and observers at a distance when operating a power tool. Distractions can
cause you to lose control of the machine.
2) E
LECTRICAL SAFETY
a) The power tool plugs must match the outlet. Never modify the plug in any way. Do not
use adapter plugs with grounded power tools. Unmodified plugs and corresponding
sockets will reduce the risk of electric shock.
b) Avoid body contact with grounded surfaces such as pipes, radiators, stoves and
refrigerators. There is an increased risk of electric shock if your body is grounded.
c) Do not expose power tools to rain or humidity conditions. If water enters a power tool,
the risk of electric shock will increase.
UNIT
V
Hz
V
The
Mm
V
%
%
%
%
cos
φ
-
-
VALUE
230
50
30-50
20-105
1.6 - 2.5
23.1
100
60
20
80
0.73
F
IP21S