VALBERG 4D 511 E DX625C Instrucciones De Uso página 10

Ocultar thumbs Ver también para 4D 511 E DX625C:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

C
Useful information
Cleaning of door tray
• According to the direction arrow in the figure below, use
both hands to squeeze the tray, and push it upward, then you
can take it out.
• After washing the tray having been taken out, you can adjust
its installing height in accordance with your requirement.
Defrosting
• The refrigerator is made based on the air-cooling principle
and thus has automatic defrosting function.
Frost formed due to change of season or temperature may
also be manually removed by disconnection of the appliance
from power supply or by wiping with a dry towel.
16
EN
C
Useful information
Out of operation
• Power failure: In case of power failure, even if it is in
summer, foods inside the appliance can be kept for several
hours; during the power failure, the times of door opening
shall be reduced, and no more fresh food shall be put into
the appliance.
• Long-time nonuse: The appliance shall be unplugged and
then cleaned; then the doors are left open to prevent odor.
• Moving: Before the refrigerator is moved, take all objects
inside out, fix the glass partitions, vegetable holder, freezing
chamber drawers and etc. with tape, and tighten the levelling
feet; close the doors and seal them with tape. During moving,
the appliance shall not be laid upside down or horizontally,
or be vibrated; the inclination during movement shall be no
more than 45°.
WARNING:
The appliance shall run continuously once it is started.
Generally, the operation of the appliance shall not be
interrupted; otherwise the service life may be impaired
17
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

971816

Tabla de contenido