Sauder 414141 Instrucciones De Montaje página 19

15 15
These holes must line up
over the SHELF (G).
NAIL
(25 used in this step)
Carefully turn your unit over onto its front edges. Lay the BACK (H) over your unit.
Make equal margins along all four edges of the BACK (H). Push on opposite corners of your unit if needed to make it "square".
Fasten the BACK (H) to your unit using the NAILS (1N).
NOTE: Be sure to tap NAILS into the holes that line up over the SHELF (G).
NOTE: The perforations must be located as shown and have been provided for access through the BACK. Carefully cut out the holes
needed.
414141
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
The perforations must be here.
H
1N
www.sauder.com/services
Page 19