Sauder 414141 Instrucciones De Montaje página 8

4 4
U
These edges
should be even.
Flip the ENDS (A and B) and UPRIGHT (C) over onto their opposite surface.
Turn six BLACK 9/16" FLAT HEAD SCREWS (32S) into the ENDS (A and B ) and UPRIGHT (C) until the shoulder of the
SCREWS rest on the surface of each one.
Slide the LOWER END MOLDINGS (U) onto the ENDS and UPRIGHT. Line up the groove in the MOLDINGS over the head of the
SCREWS in the ENDS and UPRIGHT.
Page 8
C
U
These edges
should be even.
www.sauder.com/services
A
Shoulder
B
BLACK 9/16" FLAT HEAD SCREW
These edges
should be even.
U
Apply pressure with your hands as
you guide the MOLDINGS over
the SCREWS and onto the ENDS.
32S
(6 used in this step)
414141