Sunbeam Products Oster OS-DWG12SS Manual De Instrucciones página 34

Use of "3 in 1" Detergent Tablets
General Advice
1. Before using these products you should first check that the water hard-ness in your supply is
compatible with the use of these products as per the detergent manufacturer's instructions (on the
product packaging).
2. These products should be strictly used according to the detergent manufacturer's instructions.
3. If you encounter problems when using "3 in 1" products for the first time then please contact the
detergent manufacturers care line (the telephone number is given on the product packaging).
These products are detergents with integrated and combined detergent/rinse aid and salt functions.
Before using these products, you should first check that the water hardness in your supply is
compatible with the use of these products as per the detergent manufacturers (on the product
packaging).
Special Advice
When using combination products, the rinse-aid and salt lights are no longer useful. It may be
helpful to select the lowest possible setting for water hardness.
To select "3 in 1" function:
1. Press the power switch and select the 3 in 1 washing cycle by pressing the function alternative
button until the "3in1" indicator blinks.
2. The 3 in 1 washing cycle will be available after pressing the start/pause button, and the"3 in 1"
indicator lights.
To cancel "3 in 1" function:
Follow the 'Cancelling a program in progress' instructions. If you decide to switch to the use of a
standard detergent system we advise that you:
1. Refill both the salt and rinse aid compartments.
2. Switch the water hardness setting to the highest possible position and run for three "Eco" cycles
without load.
3. Readjust the water hardness setting again according to the conditions for your region (For more
information please refer to your instruction manual).
Note:
3 in 1washing cycle is additional function, they must be used with another program (Intensive, Eco
and Light).
English-8