Loading Cutlery And Dishes - Sunbeam Products Oster OS-DWG12SS Manual De Instrucciones

Before loading the dishes, you should:
Remove large left-over.
Soften remnants of burnt food in pans.

Loading Cutlery and Dishes

When Loading the Dishes and Cutlery, Please Note:
Dishes and cutlery must not impede the rotation of the spray arms.
Load hollow items such as cups, glasses, pans etc. with the opening downwards so that water
cannot collect in the container or a deep base.
Dishes and items of cutlery must not lie inside one another or cover each other.
To avoid damage to glasses, they must not touch.
Load large items which are most difficult to clean into the lower basket.
The upper basket is designed to hold more delicate and lighter dishware such as glasses,
coffee and teacups.
Long bladed knives stored in an upright position are a potential hazard!
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in
the upper basket.
Attention!
Damage to Glassware and other Dishes possible causes:
Type of glass or manufacturing process. Chemical composition of detergent.
Water temperature and duration of dishwasher program.
Suggested remedy:
Use glassware or porcelain dishes that have been marked dishwasher-proof by the
manufacturer.
Use a mild detergent that is described as kind of dishes. If necessary, seek further information
from detergent manufacturers.
Select a program with a low temperature.
To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the
program has ended.
At the End of the Wash
When the working cycle has finished, the buzzer of dishwasher will ring for 6 times, then stop. Turn
off the appliance using the " " button, shut off the water supply and open the door of the
dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and
utensils while they are still hot and more susceptible to breakage. They will also dry better.
English-12