Maintenance Schedule; To Examine The Battery And The Battery Charger; To Clean The Product, The Battery And The Battery Charger - Husqvarna 522iHD60 Manual De Usuario

Maintenance schedule

The following is a list of the maintenance steps that you
must do on the product.
Maintenance
Clean the external parts of the product with a dry cloth. Do not use water.
Examine that the start and stop switch works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view. Refer to
power trigger lockout on page 27 .
Make sure that all controls work and are not damaged.
Make sure that the blade and blade guard have no cracks and that they are not
damaged. Replace the blade or the blade guard if they have cracks or if they
have been exposed to impact.
Make sure that the blade is not bent or damaged. Speak to your dealer to
replace the blade if it is necessary.
Make sure that the hand guard is not damaged. Replace the guard if it is dam-
aged.
Make sure that the screws and nuts are tight.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Lubricate the blade.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
1731 - 003 - 12.10.2022
To do a check of the power trigger and
To examine the blade
1. Clean the blade from unwanted materials with an
anti corrosion cleaning agent before and after you
use the product.
2. Examine the edges of the blade for damages and
deformation.
3. Use a file to remove burrs on the blade.
4. Make sure that the blades move freely.
To use manual gear rotation
1. Remove the battery.
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
33